Search results

Are there any differences, or are they based on what mods you've done to the bike

Hello again, wanted to find if anyone here has or know if Race Tech springs and valves will work on a 2013 FZ8, their website states only for 2011-2012 models

Ok i'll try another question lol, anyone on this forum run R1 front and back suspension on their FZ8's, if i decide to get another FZ8 i wanted to upgrade the suspension and am looking for a bargain, don't want to really fork over the money for Ohlins they can be quite pricey

Wanted to know if anyone here has done this swap by putting on or swapping out the suspension on the FZ8 for the FZ1 suspension and was also wondering about the cost, since i'm on a budget i'm trying to get the best bang for the buck. I read a thread by NoNine4Me and in that thread a member...

Aside from a full exhaust, tail tidy, and bar end mirrors any other tips in regards to shaving unwanted weight from the bike? not including the rider, i know that factors in to, but do engine covers, stator covers etc. like brands from R&G, aftermarket brake&clutch levers probably don't save...

Anyone here know the weight difference between the stock OEM battery and an aftermarket lightweight battery and if anyone here has used one, i don't know if this is true but i've heard that a lightweight battery can save 10-20lbs of weight. I think it would be closer to 5-10 lbs weight savings...

Anyone here have or use any Rizoma products on their FZ8's? and what are your opinions of their products, thanks

Has anyone here ever thought about doing the DV8R parts from Copperdawg on the FZ8, like the raditaor side covers and belly pan etc, was considering getting an FZ1, but i'm more than likely to get another FZ8 instead and really like the way those parts look like on an FZ1

Anyone here know of any belly pans that would work with a Graves full system, haven't been able to find anything that looks like it would work with that exhaust, and wanted to know if has pics or know of any other brands, thanks

Hi there been awhile since i've been on here but wanted to ask a question of you all, i recently came across a youtube of guy who had a FZ8 dyon tuned with a full Akropovic exhaust, K&N air filter and a Bazzaz Fuel mapper, He claimed 105 hp and 60 ft. lbs at the wheel after the dyon tune almost...

Hi there been awhile since i've been on here but wanted to ask a question of you all, i recently came across a youtube of guy who had a FZ8 dyon tuned with a full Akropovic exhaust, K&N air filter and a Bazzaz Fuel mapper, He claimed 105 hp and 60 ft. lbs at the wheel after the dyon tune almost...

Can you do a dyon tune on a 2013 FZ8 without a PCV? I've seen others mention the ECU is locked and of so, how would you unlock it? Possibly considering getting another FZ8 and wanted to do a full exhaust dyno tune.

I urgently need to sell my FZ8, hours were cut back at work and I can no longer afford to keep the bike. I'm willing to sell it less than what I owe on it, the bike was purchased through a Yamaha finance credit card and the buy out is $5800 but willing to sell it for less, will entertain offers...

I'm gonna be selling my 2011 Yamaha FZ8, it has just turned over 8,000 miles and I need to sell it, I'm selling it for what I owe on it, which is just under $6,000. The bike has as far as mods are: CRG Levers and Bar End Mirrors, Puig Windscreen and Frame Sliders, Rear Swing Arm Spools, Yamaha...

Hello all, been awhile since i've been on this forum, I wanted to ask question and hope some of you might clear things up a bit. Had my bike flash-tuned recently(love it). In a few months i'm gonna plan on getting a set of akra headers for my bike. I know i'll end up having to flash-tune the...

One of the bikes i'm looking at as a possible 2nd bike down the road is the FZ1 and I wanted to know was does anyone know of a streetfighter conversion kit for the bike and where to find one or if they even make one. Thanks in advance.

I read a recent thread on this forum regarding ECU flashing, since i've decided to get mine done as well, the question I had was what kind of hp gains could i expect to see at the wheel with a K&N air filter and a slip-on exhaust. One gentleman stated that he got 106 hp at the wheel with a...

A local dealership had a demo day today and I got to ride some nice bikes. That's where I found my next bike.:D. I got to demo a Street Triple, Speed Triple and a Ducati 821 monster, all very nice bikes in their own right, but the one I want for now is the Speed Triple R, what a frickin nice...

I NEED HELP with this, I have a 2011 FZ8 with a K&N air filter and a Two-Brothers slip-on exhaust that's the only performance mods done to the bike, i eventually want to put a set of Akrapovic headers on it but that will come down the road, i want to keep the air box stock to keep the low and...

Since I already have a k&n air filter and two-brothers slip-on and i decide to go with a arrow header to make it a full exhaust do i have to do the air box mod or can i run the stock air box with the air filter and the full exhaust then have the ECU flashed/tuned.