Did you have a custom map made on the Dyno? That's the smoothest dyno sheet I have seen so far. So I guess the way to go is flash then fine tune with PCV.
Graves full exhaust, k&n air filter and air box mod (3 1 inch holes cut, not cut out the whole bottom of air box) and graves block off plates (not really a power mod) and the turbojoetuned reflash and then the power commander
We'll looks like I better do the PCV mod too since it actually gains power with turbojoe's flash. BTW The PCV mod is just blocking the AIS hose correct? Good info.
We'll looks like I better do the PCV mod too since it actually gains power with turbojoe's flash. BTW The PCV mod is just blocking the AIS hose correct? Good info.
There is a pcv (power commander 5) which I installed and got more power,and torque and yada yada yada.(fuel control module)
There is PVC mod (plastic pipe) which is for the THROTTLE (doing same thing as r6 throttle tube mod, 1/6 turn)
And the AIS mod( does the same thing as smog block off plates) there is a write up on blocking..I have the graves smog block off plates and literally removed the smog system