Load Resistors

[SBGuy]

I have the MotoDynamic Taillights and want to installed some flush LED front turning signals. What kind of load resistors would i need to do this?

 

[9 Lives]

Just change the flasher, plug and play and it works much better.

This is the one I bought and it works great, I have the same set up as you.

LED Flasher Relay Slows Signal Rate Yamaha FZ6R FZ1 FZ8 FJR1300 R6 R1 Seca | eBay

 

[Banky2112]

Sportbike track gear has all the different resistors for motodynamic

 

[HeresMyMind]

I agree just do the flasher, plug and play problem solved.

-B

 

[SBGuy]

Cool, thanks for the replies and the link

 

[cekic]

@SBGuy: Hi, that’s true that the turning signals will work properly without the resistors but you can use the resistors as it is optional and helps to maintain the standard blink rate. The resistor you need is Inline cement type resistor and it is available with Moto dynamic.

electronics assembly

 

[a-rode]

If you are near Indianapolis or another CycleGear store you can buy one at the store for $20, on sale for $16 this week.